Chlorinated Polyvinyl Chloride
CPVC is a new type of engineering plastic with broad application prospects. The resin is made by chlorination of polyvinyl chloride (PVC) resin and is a new type of engineering plastic. The product is white or light yellow odorless, odorless, non-toxic loose granules or powder. After chlorination of PVC resin, the molecular bond irregularity increases, the polarity increases, the solubility of the resin increases, and the chemical stability increases, thereby improving the heat resistance, acid resistance, alkali, salt, oxidant, etc. of the material. corrosion. Increased numerical mechanical properties of heat distortion temperature, chlorine content increased from 56.7% to 63-69%, Vicat softening temperature increased from 72-82 °C to 90-125 °C, maximum operating temperature up to 110 °C, long-term use The temperature is 95 °C. Among them, the performance index of CORZAN CPVC is even better.Send InquiryChat Now
The chlorinated polyvinyl chloride (CPVC resin) is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white or canary loose grain or powder with no smell, odorless and innocuity. It is innocuous un-dangerous cargo.
After chlorination, it is more stable. In addition, the mechanical performance of numerical heat distortion temperature is improved. and the increase of chlorine content from 56.7% to 63-69%, and Vicat softening temperature from 72-82°C to 90-125℃; its highest service temperature can reach 110℃ and long-term service temperature can reach 95℃.
Accordingly, CPVC resin is one kind of advanced engineering plastic with vast foreground.
Comparison of resin indexes:
Vicat softening temperature(℃)
Linear coefficient of thermalexpansion(K-1)
Extension at break
★ Pipe: CPVC is mainly used for the production of hot water and corrosive media for sheet, bar and pipe. It can maintain sufficient strength when it does not exceed 100 °C, and can be used for a long time under high internal pressure. The weight of CPVC is 1/6 of that of yellow copper and 1/5 of steel, and it has extremely low thermal conductivity. Therefore, the pipe made of CPVC is light in weight, good in heat insulation and does not require heat preservation.
★ CPVC pipe can be used as hot water pipe, electroplating solution pipe, thermochemical reagent conveying pipe, wet chlorine gas conveying pipe of chlor-alkali plant.
★ Injection molded parts: CPVC resin can produce pipe fittings for water supply pipes, filter materials, dewatering machines, etc., and can also produce electrical and electronic parts. Such as wire troughs, protective layers of conductors, electrical switches, protective covers for fuses, insulation materials for cables, etc.
★ Calendered sheet: It can be used to manufacture chemical and chemical resistant equipment such as reactors, valves and electrolytic cells.
★ Composite material: CPVC composite material composed of CPVC and some inorganic or organic fibers has good impact resistance and heat resistance is better than other resin composite materials. It can be made into sheet, pipe, corrugated board and profiled materials.
★ CPVC can be used for the modification of polyvinyl chloride fiber: the washing temperature of domestically produced polyvinyl chloride fiber should not exceed 60 °C, and adding 30% CPVC when spinning polyvinyl chloride can greatly improve the heat resistance of the product, and the shrinkage rate is 50% of the drop to less than 10%.
★ Foaming material: The heat resistance of CPVC foaming material is better than that of PVC foaming material. The shrinkage rate at high temperatures is quite small, and it can be used as a heat insulating material for hot water pipes and steam pipes. CPVC with a chlorine content of more than 60% has a good solvent retention. CPVC can be foamed in a solvent that generates gas when heated, and a uniform, microporous foaming gas can be obtained. The boiling point is 50-160 °C. A solvent such as a hydrocarbon, an ether or an aldehyde is used as a foaming agent.
★ Others, blending CPVC with thermoplastic or thermosetting plastics can significantly improve the physical and mechanical properties of these materials, such as improving the heat resistance of the products.
★ In foreign countries, CPVC with higher impact resistance and better transparency has been prepared through the improvement of production technology. This transparent material can be used in automobiles, optical discs and audio-visual products, and has good economic benefits.
Pls store this product in the dry and ventilated warehouse with stack height nor more than 10 bags and avoid solarization and damp.